SKU 91995
For technical questions, please call 1-800-444-3353.
Page 13
To Adjust The Bevel Of Cut
WARNINg! Prior to performing this
procedure, make sure the Power
Cord (102) of the Miter Saw is un-
plugged from its electrical outlet.
FIgURE P
HANDlE
(30)
gAUgE
(24)
BACk RACk
(25)
1. The bevel angle (or Saw Blade
tilt
capacity) may be adjusted from 0 -
45° to the left. To do so, loosen the
Handle (30) located at the rear of the
Miter Saw.
(See Figure P.)
Tilt the Back Rack (25) until the de-
2.
sired bevel angle of cut is achieved
as indicated on the Gauge (24).
Then, re-tighten the Handle (30) to
lock the Back Rack in place.
(See Figure P.)
