SKU 91007
PAGE 15
INSPECTION, MAINTENANCE, AND CLEANING
1.
WARNING! Always disconnect the Battery Charger’s
Charging Plug
from the Hammer Drill/Driver and unplug the Battery Charger from its elec-
trical outlet before performing any inspection, maintenance, or cleaning of
the tool.
2.
Before each use, inspect the general condition of the tool. Check for misalign-
ment or binding of moving parts, cracked or broken parts, damaged wiring, and
any other condition that may affect its safe operation. If abnormal noise or vibra-
tion occurs with the tool, have the problem corrected before further use.
Do not use damaged equipment.
3.
To clean, use a clean, damp, cloth to clean the outer surfaces of the Hammer Drill/
Driver and accessories. A mild detergent may be used. Do not use solvents. Do
not immerse the Hammer Drill/Driver, Batter, or Battery Charger in water.
4.
When storing, always keep the Hammer Drill/Driver and accessories in the Car-
rying Case and in a safe, clean, dry location.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTUER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
