Chicago Electric 66603, Set Up, Operating, And Servicing Instructions

Page: 4 / 28

Page 4 SKU 66603 For technical questions, please call 1-800-444-3353.
Do not use the power tool if the Engine switch does not turn it on or off. 2. Any tool
that cannot be controlled with the Engine Switch is dangerous and must be replaced.
Disconnect the spark plug wire from the Engine before making any adjustments, 3.
changing accessories, or storing the tool. Such preventive safety measures reduce
the risk of starting the tool accidentally. Always disconnect the spark plug wire before
performing any inspection, maintenance, or cleaning procedures.
store idle tools out of reach of children and other untrained persons.
4. Tools are
dangerous in the hands of untrained users.
Maintain tools with care. Keep the Generator clean. 5. Properly maintained tools are
less likely to malfunction and are easier to control. Do not use a damaged tool. Tag
damaged tools “Do not use” until repaired.
check for misalignment or binding of moving parts, breakage of parts, and any 6.
other condition that may affect the tool’s operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your model. 7.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
cAUTIoN: This generator is not intended to power sensitive electronic equipment* 8.
without the addition of an appropriate line conditioner and surge protector (both not
included). Sensitive electronic equipment should be operated on approved inverter type
generators or pure sine wave generators.
If the plugged in product operates abnormally or unusually slow, immediately stop using
the generator as a power source. Always read and adhere to the instruction manual of
the product to be powered, to make sure that it can be safely and efficiently powered by a
portable generator.
Note: When using a generator to provide home standby electricity, a transfer switch (sold
separately) is needed to prevent back feeding power into the utility line.
Connections for standby power to a building electrical system must be made by a qualified
electrician. The connection must isolate the generator power from utility power, and must
comply with all applicable laws and electrical codes.
wARNING: Improper connections to a building electrical system can allow electrical
current from the generator to backfeed into the utility lines. Such backfeed may electrocute
utility company workers or others who contact the lines during a power outage, and the
generator may explode, burn, or cause fires when utility power is restored. Consult the
utility company or a qualified electrician.
*sensitive electronic equipment includes, but is not limited to, audio/video
equipment, some television sets, computers, and printers.
Before connecting an appliance or power cord to the generator: Make sure that it 1.
is in good working order. Faulty appliances or power cords can create a potential
for electrical shock.
Ac Applications