background image

Page 8

SKU 66433

for technical questions, please call 1-800-444-3353.

operating instructions

read the entire important 

safetY information section 

at the beginning of this manual 

including all text under 

subheadings therein before set 

up or use of this product.

Plug the Light into a standard, 

1. 

grounded 120V electrical outlet.
Press the Switch on the back of the 

2. 

unit to turn the Light on.

warning!  Keep the light away 

3. 

from combustible objects.  the 

light and housing will get hot 

enough to start a fire.

To prevent accidents, turn off the 

3. 

Light and disconnect its power supply 

after use.  Clean, then store the Light 

indoors out of children’s reach.

maintenance and 

serVicing

 

risk of serious 

personal injury 

from accidental starting or 

electric shock.  turn the 

power switch of the light to 

its “off” position and unplug 

the light from its electrical 

outlet before performing any 

inspection, maintenance, or 

cleaning procedures.

cleaning, maintenance, and 

lubrication

Before each use,

1. 

 inspect the 

general condition of the Light.  Check 

for loose screws, misalignment or 

binding of moving parts, cracked or 

broken parts, damaged electrical wir-

ing, and any other condition that may 

affect its safe operation.

after use,

2. 

 clean external surfaces 

of the Light with clean, moist cloth.

warning!  if the supply cord of 

3. 

this light is damaged, it must be 

replaced only by a qualified ser

-

vice technician.

warning

Summary of Contents for 66433












Reviews: