SKU 66274
For technical questions, please call 1-800-444-3353.
Page 3
Many accidents are caused by
poorly maintained items.
Service
5.
have the Light serviced by a
a.
qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the Light is maintained.
Light Safety warnings
Maintain labels and nameplates on
1.
the Light. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
Do not leave the Light unattended
2.
when it is plugged into an electrical
outlet. Turn off the Light, and unplug
it from its electrical outlet before leav-
ing.
This product is not a toy. Keep it out
3.
of reach of children.
People with pacemakers should
4.
consult their physician(s) before use.
Electromagnetic fields in close prox
-
imity to heart pacemaker could cause
pacemaker interference or pacemaker
failure. In addition, people with pace-
makers should:
• Avoid operating alone.
• Properly maintain and inspect to
avoid electrical shock.
• Any power cord must be prop
-
erly grounded. Ground Fault Circuit
Interrupter (GFCI) should also be
implemented – it prevents sustained
electrical shock.
WARNING: Handling the cord on
5.
this product will expose you to lead,
a chemical known to the State of
California to cause cancer, and birth
defects or other reproductive harm.
Wash hands after handling. (Califor-
nia Health & Safety Code § 25249.5,
et seq.)
The warnings, precautions, and
6.
instructions discussed in this instruc-
tion manual cannot cover all possible
conditions and situations that may
occur. It must be understood by the
operator that common sense and cau-
tion are factors which cannot be built
into this product, but must be supplied
by the operator.
SAVe theSe
inStructionS.
grounding
improperly
connecting the
grounding wire can result in
electric shock.
Check with a qualified
electrician if you are in doubt
as to whether the outlet is
properly grounded. do not
modify the power cord plug
provided with the tool. never
remove the grounding prong
from the plug. do not use the
tool if the power cord or plug
is damaged. if damaged, have
it repaired by a service facility
before use. if the plug will not
fit the outlet, have a proper
outlet installed by a qualified
electrician.
