SKU 66006
For technical questions, please call 1-800-444-3353.
Page 13
maintenance and
SerVicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
tO preVent
SeriOuS injurY
FrOm accidental
OperatiOn:
turn the power Switch of the
tool to its “OFF” position and
remove the power pack
before performing any
inspection, maintenance, or
cleaning procedures.
tO preVent SeriOuS
injurY FrOm tOOl
Failure:
do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
cleaning and maintenance
beFOre eacH uSe,
1.
inspect the
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
Remove the Power Pack by pressing
2.
down on the Power Pack Release
Button (See Fig. 3.) and sliding the
Power Pack off.
Slide the Power Pack onto the Bat-
3.
tery Charger and plug the charger
into a 120V outlet.
Battery chargers get hot, so place it
a.
on a stable, non-flammable surface
and monitor the recharging time.
Unplug charger when done.
aFter uSe,
4.
clean external surfaces
of the tool with clean cloth.
The carbon brushes may require
5.
maintenance when the motor perfor-
mance of the tool decreases or stops
working completely.
Always have a qualified technician
a.
replace the brushes.
note:
New carbon brushes tend to spark
when first used until they wear and
conform to the motor’s armature.
6.
warning! if the supply cord of
this power tool is damaged, it must
be replaced only by a qualified
service technician.
long-term lithium/ion power
pack maintenance
Part of a good long-term mainte-
1.
nance program is the proper charging
of batteries.
This is especially important with the
a.
Lithium-Ion Power Pack (32).
Fig. 6
Power Bar Display Button
Power Bar
b. This Drill/Driver and recharging
system comes with the proper bat-
tery charging device which displays
the condition and charge state of the
Power Pack. (See Fig. 6.)
A very useful and convenient fea-
c.
ture is the Power Bar Display Button