SKU 55594
For technical questions, please call 1-800-444-3353.
Page 15
To Assemble The Face Shield:
1.
Slide the Lens downward into the inside opening of the Face Shield (26).
(See Figure H.)
2.
Slide the Lens Holder Brackets downward into the inside opening of the Face
Shield (26).
(See Figure H.)
3.
Snap the Face Shield Handle into the lower opening in the Face Shield (26).
(See Figure H.)
FACE SHIELD
(26)
FACE SHIELD HANDLE
LENS
LENS HOLDER
BRACKET
FIGURE H
OPERATING INSTRUCTIONS
Welding Equipment Duty Cycle And Overheating:
1.
IMPORTANT! Welding longer than the rated duty cycle for this Welding
equipment can damage the tool and void its warranty.
2.
Duty cycle is a percentage of 10 minutes that the unit can weld at its rated load
without overheating.
3.
If the unit should overheat, the built-in thermostat opens, output stops, and the
cooling fans continue to run. Wait fifteen minutes for the unit to cool. Reduce
