SKU 55594
For technical questions, please call 1-800-444-3353.
Page 9
29.
WARNING!
This product, when used for welding, cutting, and similar
applications, produces chemicals known to the State of California to cause
cancer and birth defects (or other reproductive harm).
(California Health & Safety code 25249.5, et seq.)
Improperly connecting the grounding wire can result in the risk of electric
shock. Check with a qualified electrician if you are in doubt as to whether the
outlet is properly grounded. Do not modify the power cord plug provided with
the tool. Never remove the grounding prong from the plug. Do not use the
tool if the power cord or plug is damaged. If damaged, have it repaired by
a service facility before use. If the plug will not fit the outlet, have a proper
outlet installed by a qualified electrician.
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
1.
Tools marked with “Grounding Required” have a three wire Cord and three prong
grounding Plug. The Plug must be connected to a properly grounded Outlet. If
the tool should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user, reducing the risk of electric
shock.
(See Figure A, next page.)
2.
The grounding prong in the Plug is connected to the green wire inside the Cord to
the grounding system in the welding equipment. The green wire in the Cord
GROUNDING
WARNING!
30.
WARNING!
People with pacemakers should consult with their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference or failure of the pacemaker.
31.
WARNING!
Welding and cutting fumes and gases may be hazardous if
inhaled for long periods of time.
32.
WARNING!
The warnings, precautions, and instructions discussed in this
instruction manual cannot cover all possible conditions and situations that may
occur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by the
operator.
SAVE THESE INSTRUCTIONS
