SKU 55594
For technical questions, please call 1-800-444-3353.
Page 13
To Attach The Ground Clamp:
1.
WARNING!
Make sure to connect the Ground Clamp (28) to the Ground
Cable only.
(See Figures E and F.)
2.
Slide the Handle Grip off the Ground Clamp (28) to expose the Cable attachment
area.
(See Figure F.)
3.
Slide the Handle Grip over the end of the Ground Cable.
(See Figure F.)
4.
Attach the Ground Cable to the Ground Clamp (28), using the Screw,
Washer, and Nut.
(See Figure F.)
5.
With the Ground Cable secured to the Ground Clamp (28), slide the Handle
Grip over the Ground Clamp.
Make sure
the Handle Grip covers the area where
the Ground Cable is attached to the Ground Clamp.
(See Figure F.)
6.
NOTE:
The Welder produces powerful electrical currents. It is critical that
you remain insulated from this current. Never use the Welder if any of the
insulating Handle Grips are not in good repair. (See Figure F.)
ASSEMBLY INSTRUCTIONS
CAUTION!
Always make sure the Power Cord of the Welder is unplugged
from the electrical outlet prior to assembly or making any adjustments to the tool.
CAUTION!
Always wear heavy duty work gloves for Ground Clamp and
Electrode Holder Assembly.
FIGURE F
GROUND CLAMP
(28)
GROUND
CLAMP
CABLE
HANDLE
GRIP
SCREW
WASHER
NUT
WARNING!
MAKE SURE TO ATTACH
GROUND CLAMP CABLE TO GROUND CLAMP (28)
ONLY.
