Page 2
SKU 47991
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Power
120 V~, 60 Hz, 10 A
Chuck Capacity 1/16” - 1/2”
Speed
0 - 800 RPM No Load
Dimensions
8-5/8” W x 15-3/4” L x 6-1/4” H
Power Cord
6’ Long, 18 AWG
Note:
Performance of this tool (if powered
by line voltage) may vary depending
on variations in local line voltage.
Extension cord usage may also affect
tool performance.
Save This Manual
You will need the manual for the safety
warnings and precautions, assembly instruc-
tions, operating and maintenance proce-
dures, parts list and diagram. Keep your
invoice with this manual. Write the invoice
number on the inside of the front cover.
Keep the manual and invoice in a safe and
dry place for future reference.
SAFETY WARNINGS AND
PRECAUTIONS
WARNING: When using tool, basic safety
precautions should always be followed to
reduce the risk of personal injury and dam-
age to equipment.
Read all instructions before using this
tool!
1.
Keep work area clean.
Cluttered
areas invite injuries.
2.
Observe work area conditions.
Do
not use machines or power tools in
damp or wet locations. Don’t expose
to rain. Keep work area well lighted.
Do not use electrically powered tools
in the presence of flammable gases or
liquids.
3.
Keep children away.
Children must
never be allowed in the work area. Do
not let them handle machines, tools, or
extension cords.
4.
Store idle equipment.
When not
in use, tools must be stored in a dry
location to inhibit rust. Always lock up
tools and keep out of reach of children.
5.
Use the right tool for the job.
Do
not attempt to force a small tool or
attachment to do the work of a larger
industrial tool. There are certain
applications for which this tool was
designed. It will do the job better and
more safely at the rate for which it was
intended. Do not modify this tool and
do not use this tool for a purpose for
which it was not intended.
6.
Dress properly.
Do not wear loose
clothing or jewelry as they can be
caught in moving parts. Protective,
electrically non-conductive clothes and
non-skid footwear are recommended
when working. Wear restrictive hair
covering to contain long hair.
7.
Use eye and ear protection.
Always
wear ANSI approved impact safety
goggles and ear protection. Wear a
full face shield if you are producing
metal filings or wood chips. Wear an
ANSI approved dust mask or respirator
when working around metal, wood, and
chemical dusts and mists.
8.
Do not overreach.
Keep proper
footing and balance at all times. Do
not reach over or across running
machines.
9.
Maintain tools with care.
Keep tools
sharp and clean for better and safer
performance. Follow instructions for
lubricating and changing accessories.
Inspect tool cords periodically and, if
damaged, have them repaired by an
authorized technician. The handles
must be kept clean, dry, and free from
oil and grease at all times.
10.
Disconnect power.
Unplug tool when
not in use.
