background image

1

Gasmate

®

 is a registered trademark of:   Sitro Group Australia Pty Ltd   www.gasmate.com.au

                                               Aber Holdings Ltd - N.Z   www.gasmate.co.nz

PROFESSIONAL 

BBQ SERIES

 

Model No. 4 Burner BQ1010P and 6 Burner BQ1011P 

Important:

 Retain these instructions for future use.

03503 11/16

6 Burner model shown 

FOR OUTDOOR USE ONLY 

FEATURES

•  Deluxe gas BBQ
•  Double skinned stainless steel hood with glass 

  viewing window and temperature gauge
•  Stainless steel BBQ body, fascia, cabinet 

  and side shelves 
•  Electronic Piezo ignition
•  Stainless steel grill
•  Enamel coated hotplate
•  Stainless steel main burners
•  Rear rotisserie burner
•  Operates on Propane Gas
•  Complete with hose 

  and regulator
•  AGA Certified
•  Certified for conversion 

  to Natural Gas

FOR YOUR SAFETY

 

If you smell gas:
1. Shut off the gas to the appliance.
2. Extinguish any open flame.
3.  If odour continues, immediately  call your gas supplier.
Do not store or use gasoline or other flammable vapour 

and liquids in the vicinity of this or any other appliance. 

WARNING:

 

Improper installation, adjustment, alteration,

 

service or 

maintenance can cause injury or property damage.
Read the instructions thoroughly before installing or 

servicing this equipment.

Summary of Contents for BQ1010P













Reviews: