SKU 43585
For technical questions, please call 1-800-444-3353.
Page 8
To Use The Template Guide:
1.
The Template Guide is used with a template (not provided) for producing a
large quantity of identically shaped products. A template is a mold made of
plywood or thin lumber. The template should also have openings large
enough to admit the Router Bit and the Template Guide.
2.
Secure the Template Guide (part #65) to the Base of the Router with the two
accessory Machine Screws (part #67). Make sure the projected side of the Tem-
plate Guide is facing the bottom surface of the Base of the Router.
(Figure G)
3.
Clamp the template to the workpiece in the desired location.
4.
Feed the Router in a manner so that the Template Guide moves along the
template.
67
67
65
65
Figure G
