SKU 43585
For technical questions, please call 1-800-444-3353.
Page 10
To Follow The Best Routing Direction:
1.
The Router Bit rotates clockwise. Therefore, you should adjust for this
while cutting.
2.
For most materials it is best to move the Router from left to right as you face
the workpiece.
3.
When cutting outside edges, move the Router counterclockwise. When cutting
inside edges, move the Router clockwise.
MAINTENANCE
NOTE: ALWAYS disconnect this tool from its electrical supply source
before performing any cleaning, maintenance, changing Router Bits or
Brushes.
1.
Clean with a damp cloth and dry. If necessary, use a mild detergent.
2.
For better product performance, periodically lubricate its moving parts, using a
light-grade lubricant.
3.
To change the two Carbon Brushes (part #44), use a Standard screwdriver (not
provided) to remove the two Brush Caps (part #43) located on each side of the
Router.
4.
Remove the old Carbon Brushes and replace with the two accessory Carbon
Brushes. Replace the Brush Caps.
(Figure L)
Figure K
44
43
