Page 2
SKU 40039
Power
120 V, 60 Hz, 540 Watts, 4.5 Amps (Loaded)
Maximum Stroke
1-1/16”, 3100 per minute
Shoe Plate Angles
0 - 45 Degrees in 15 Degree Increments
Overall Dimensions
3.25” W x 9” L x 9” H
Shoe Plate Dimensions
2.75” W x 5.9” L
Weight
5.9 Lbs.
Cutting Capacities
Wood: 3-3/8”, Aluminum: 9/16”, Steel 5/16”
Available Blades
SKU # 6888 T-Shank Jigsaw Blades (5 pc.)
SKU # 8261 T-Shank Jigsaw Blades (10 pc.)
Accessory: Hex Key
Blade not included.
Specifications
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
6.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
REV 04/04
