19.
To use the Power Station as a power source for an appliance, turn the Voltage
Select Switch (part #3) to its “OFF” position. (See Figure E.)
20.
Lift the Cover of the 12 Volt DC Cigarette Lighter Receptacle (part #11) located
on the side of the Power Station. (See Figure E.)
21.
Insert the Appliance’s 12 Volt DC Cigarette Lighter Plug (not included) into the
Power Station’s 12 Volt DC Cigarette Lighter Receptacle (part #11).
12 VOLT DC
CIGARETTE LIGHTER
RECEPTACLE
(#11)
APPLIANCE
12 VOLT DC
CIGARETTE LIGHTER
PLUG
(NOT INCLUDED)
VOLTAGE SELECT SWITCH (#3)
(TURN TO “OFF”)
FIGURE E
To Jump Start A Vehicle/Boat:
1.
CAUTION! Make sure to determine whether the electric system on the
vehicle/boat is 12 Volt DC or 24 Volt DC.
2.
Turn off the engine of the vehicle/boat that is to be jump started.
3.
Attach the RED/POSITIVE (+) Clamp of the Copper Booster Cable (part #1) to
the POSITIVE (+) terminal on the vehicle/boat Battery. (See Figure B.)
4.
Connect the BLACK/NEGATIVE (-) Clamp of the Copper Booster Cable (part #2)
to the BLACK/NEGATIVE (-) terminal on the vehicle/boat Battery.
(See Figure B.)
5.
Turn the Voltage Select Switch (part #3) to “12V” or “24V”, depending on the
SKU 08886
PAGE 9
