Page 9
SKU 02514
2.
Pull and route the wires from the generator connection box to the transfer switch.
3.
Make the appropriate connection within the transfer switch.
Warning: Remove power to the utility power supply leads by removing the master cir-
cuit breaker, and label “Do Not Touch - Wiring in Progress”.
4.
Connect the utility power supply leads to the transfer switch.
5.
Connect the circuit load leads from the emergency distribution panel (if used) to the
transfer switch.
Generator Connection Box
Typical Emergency Power System
115V
220V
U2
U4
U2
N
U4
N
