BATTERY SELECTION DISPLAY
Press
or
button to go to the
display.
Press
SET
for about 2 seconds to enter the
SET
mode. Press the
or
button to
select either rechargeable NiMH ( Nickel Metal Hydrid ) or AKLn ( Alkaline or Normal )
battery.
X
is not select,
is for select. After making the selection, press
SET
button
for about 3 seconds to save the change.
As Alkaline ( or Normal ) and Rechargeable ( NiMH ) batteries have different
voltages and behave differently. It is imperative that the correct battery selection
should be made to correspond with the actual batteries inserted to ensure the
correct battery status display information.
NiMH : X
AKLn :
NiMH : X
AKLn :
Battery Symbols and Status
HOW TO SWITCH OFF THE TRANSMITTER
Put the Audio switch to Mute position.
Press the power on / off switch for about 3 seconds till the LCD display disappear to
turn off the main power.
Remark : If user only turn off the Audio mute switch at the top but forget to turn off
the power on / off switch. The microprocessor is programmed such that auto-shut-
off function will be activated after 30 minutes ( factory-programmable ) when no
audio input signal is detected. This is a foolproof feature to save battery life.
The
and
buttons at the front panels serve as the Volume Controls of the
receiver. It can be pressed at any moment. Whenever it is pressed, the following
display will appear :
The first line of the display remains the same as whatever status when the button is
pressed. Only the second line of the display will show the word VOL and the digit in
the bracket is the current status of the volume level. The bar is just the graphical
representation of the level. Pressing the
button will increase the digit as well as
the bar. Pressing the
button will decrease the digit as well as the bar.
A
CH : 01 - 0 1
B
Vol ( 6 )
--------------------------------------------------------------------------------------------------------
To adjusting the Volume of the system
Summary of Contents for UB-1000
Page 1: ......
