Chiayo UB-1000, Operation Manual

Page: 4 / 10

Press Power ON of receiver for 2 seconds and release, the following page will
appear.
After 5 seconds one of the following pages will automatically appear, depending
which one was last selected as main page.
Press MENU will
roll to next page
Press MENU will
roll to next page
Press MENU will
roll to next page
Press MENU will
roll to next page
Press MENU will
roll to next page
Press MENU will
roll to next page
Remark : Transmitter is at OFF status.
CHIAYO
UDR-1000
SQUELCH LEVEL
-95 dBm ( 2 )
CF : 01- 01
RF AF
USER MODE
PRESET MODE
USER MODE
PRESET MODE
To view and roll the various display pages
USER NAME
RF AF
CHIAYO
UDR-1000
801.100MHz
RF AF
CF : 01- 01
RF AF
USER NAME
RF AF
801.100MHz
RF AF
If MENU is not pressed
again,this page will stay
as main page.
If MENU is not pressed
again,this page will stay
as main page.
If MENU is not pressed
again,this page will stay
as main page.
If MENU is not pressed
again,it will automatically
return to one of the
3 main pages.
If MENU is not pressed
again,it will automatically
return to one of the
3 main pages.
If MENU is not pressed
again,it will automatically
return to one of the
3 main pages.
Receiver Installation
Audio output connection
There are two audio outputs on the back of the Diversity receiver. Mic-level balanced and Line-level
unbalanced. Use shielded audio cable for the connection between the receiver and the mixer. If the
mixer / amp is a 1/4" phone jack, connect a cable from the 1/4" unbalanced audio output from the
receiver to the mixer / amp. If the mixer has an XLR input, connect a cable from the balanced XLR
audio output from the receiver to the mixer input. Audio output connection as shown below.
For best operation, the receiver should be placed at least
1m above the ground and 1m away from a wall or metal
surfaces to minimize reflections. The transmitter should
also be at least 1m away from a wall or metal surface to
minimize reflections. The transmitter should also be at least
1m away from the receiver as shown.
Keep antennas away from noise source such as motors,
automobiles, neon light, synthesizer, computer as well as
large metal objects.
BALANCED
DC IN
ANT.A ANT.B
12V - 15V
AF OUT
MIC LINE
ANT.A ANT.B ANT.B
AC INPUT
100V - 240V
DC IN
12V - 15V
BALANCED
AF OUT
MIC LINE
BALANCED
AF OUT
MIC LINE