Press
MENU until
this page appears.
Press
SET
button for 2 seconds to enter the
SET
mode and the following display will
appear and the cursor will flash.
A
801.100MHz
B
RF-----------AF------------
Press
SET
button for 2 seconds to enter the
SET
mode and the cursor will flash.
Use the
or
button to select the digit desired. The two digits at the top right
corner is Channel. There are 40 possible channels to be entered by user. After
selected the channel, make the corresponding change to the frequency. After
making all the changes, press
SET
button for about 3 seconds will save the change
in Group 25.
USER EDIT : 01
800.000 MHz
USER EDIT : 01
800.000 MHz
Press
SET
again each time will move the cursor one position. The first two top digits
on the left is the Group and the second top two digits to the right is the Channel.
There are all together 25 Groups and 40 Channels ( 25*40=1000 ) preset
frequencies to be chosen. Use the
or
button to select the digit. Press
SET
again will make the change and move the cursor one position forward. Once either
the Group or the Channel has been altered, the frequency will be changed
automatically. After finishing all the changes, press
SET
button for about 3 seconds
will save the changes.
Press
MENU
until
this page appears.
Press
SET
button for 2 seconds to enter the
SET
mode and the cursor will flash on
only one spot. Use the
or
button to select one of the 8 preset levels. After
making the change, press
SET
button for about 3 seconds will save the changes.
Press
MENU
until
this page appears.
Press
SET
button for 2 seconds to enter the
SET
mode. Use the
or
button to
select either
USER
or
PRESET
mode.
indicates selected. After making the
change, press
SET
button for about 3 seconds will save the change.
SQUELCH LEVEL
-95 dBm ( 2 )
SQUELCH LEVEL
-95 dBm ( 2 )
USER MODE
PRESET MODE
USER MODE
PRESET MODE
CF : 01 - 0 1
800.000 MHz
CF : 01 - 0 1
800.000 MHz
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
Both the handheld and beltpack microphone have a sensitivity setting per the SET, UP, DOWN buttons as described
earlier. For close mouth singing please selectt the sensitivity level to L (LOW ) . For normal speech, please select level
N.( Normal ). For tripod-mount application, please select the level H (high) .
Installation of Belt-Clip
This specially designed detachable belt-clip allows the user to wear the transmitter with antenna pointing upward or
downward as illustrated. To wear the transmitter with the antenna pointing upward, install the belt-clip as in the left picture.
To wear the transmitter with the antenna pointing downward, please install the belt-clip as in the right picture.
Charging points
These microphone have a module design. To change or replace a capsule, Open the grill to pull out and plug in the
capsule as shown in the following figure.
Summary of Contents for UB-1000
Page 1: ......
