15
8
Caution:
This player does not accept 8-cm diameter CD. To avoid possible damage to
the USB, remember to detach it only after switching off the player.
In mp3 mode and in USB mode .
If this key is pushed, PLAY mode is changed cyclically shown below.
PLAY MODE
EJECT
PROG
MUTE
POWER
ESP
FIND
PLAY ALL RANDOM REPEAT TRACK REPEAT FOLDER
REPEAT ALL RANDOM REPEAT PLAY ALL
IN CD mode If this key is pushed,
PLAY mode is changed cyclically shown below
PLAY ALL RANDOM REPEAT TRACK
REPEAT ALL RANDOM REPEAT PLAY ALL.
When this key is pushed, door is moved out.
Set to programming mode.
When programming mode, [stop] key is pushed then program is all cleared.
When this key is pushed during CD is playing, the set will mute the output.
Push again to recover the output .
Power SW of the set .
In CDDA mode, Press"ESP" key , The ESP display lighted and the set is
in electronic anti-shock state. The electronic anti-shock time is about 40
seconds. Press "ESP" key again, cancel the ESP function.
In MP3 mode : Press this key once FILE search mode changed .
Press this key twice ALBUM search mode changed .If press this key long
time once track is displayed .press twice ID3 TAG is displayed.
You can use these keys to select the track you want directly.
When this key is pushed , the volume will decrease by 1dB per step ,
the min. volume is 0dB.
When this key is pushed, the volume will increase by 1dB per step ,
the max. volume is 30dB.
0~10;
VOL.-
VOL.+
ENCODE
ENCODE
option
In stop mode:
Skip the starting play folder to previous folder during stop mode, cyclic
to the last folder if it is in the first folder.
In program entry mode:
Change the file for program select to previous folder's first file, cyclic to
the last folder if it is in the first folder.
In normal play mode:
Skip the playing file to the previous folder's first file.
FOLDER-
DOWN
3. Making changes to Sensitivity Level:
Use UP or DOWN button to go to the SENS SET page.
Press UP or DOWN button to increase or decrease the Sensitivity Level of the
transmitter. The MAX level is 4 and the MIN level is 1.
When a desired sensitivity level has been selected for your application, it will be
automatically saved and stored in the Memory.
Remark : When selecting Sensitivity level, please bear in mind that Level 1 is
for close proximity singing purposes whereas Level 4 is for use of transmitter
on tripod mount for speech purposes. When Level 4 setting is used for close
proximity singing, high SPL input will result in undesirable distortion in the
output.
After performing setting changes, you could turn the protective cover 180 in either
direction to block the buttons from being accidentally adjusted.
1.Making changes to Channel:
Use UP or DOWN button to go to the CHANNEL/ FREQUENCY page. The cursor
will flash to allow changes to be made. Pressing UP or DOWN button will increase
or decrease the channel number. The corresponding frequency will change
accordingly. When a desired channel is selected, it will be automatically saved and
stored in the memory.
2. Making changes to Battery selection:
Use UP or DOWN button to go to the Battery selection page.
Press UP or DOWN button to move the cursor to either NiMH ( rechargeable battery )
or AKLN ( Alkaline battery ) position.
When the desired battery has been selected, it will be automatically saved and
stored in the memory.
Remark : NiMH battery must be selected when rechargeable battery is being
used. Never select AKLN ( Alkaline ) when transmitter is intended for charging
as Alkaline battery can not be charged ! Wrong selection of battery will result
in battery sensing electronics to display wrong and misleading status
Making changes to various settings in handheld transmitter.
