16
BELT-PACK TRANSMITTER (SM-5016) UHF
SM-5016 uses 2 pieces of " AA " size batteries (Alkaline battery is recommended ). To install or remove
the batteries, press the release buttons at the edges of the transmitter to open or close the cover as
illustrated ( Fig.1 ). When installing the batteries with the cover open toward you, the cover might
block your hand. It is thus recommended that while inserting or removing the batteries please hold the
transmitter in such a way that the cover open away from you. ( Fig.2 )
INSTALLATION OF BATTERIES
8
9
11
10
11
Antenna
Battery weak / audio mute indicator
Audio mute switch
Mini-XLR connector
Power ON / OFF switch
LCD display
Mini USB port
Cover release button
Charging contacts
Lavalier microphone
Mic clip
Fig.2
Fig.1
12
13
14
16
15
14
13
12
SET
UP
DOWN
GT
MT
15
16
7
Operating the CD / Digital Player with USB-Interface
To begin operation, first switch on Focus 505 and then press the Power/Vol control knob to operate.
Functions
PLAY/
PAUSE
STOP
CD
USB
SKIP+
UP/CUE
SKIP-
DONW/REV
FOLDER-UP
When this key is pushed during CD stop, play will start after track search.
When this key is pushed during CD is playing, then it is changed to pause.
When this key is pushed during CD is pausing, then it is changed to play.
When CD is not stop, if this key is pushed then CD will stop.
When press this key will change to cd-mp3 mode.
When press this key will changed to USB mode.
In stop mode:
Change the starting play track(file) during stop mode, cyclic to the first track,
if it is in the last track.
In program entry mode:
Change to the next track(file) for program select .
In play mode, pause mode, program play mode, random play mode:
Single pressed, skip the playing track(file) to next track(file) for normal
play/pause mode, to next program index track(file) for program play/pause
mode, to next random track(file) for random play /pause mode.
Continue pressed , fast forward during play/pause when pressed more
than 0.7sec.
In stop mode:
Change the starting play track (file) during stop mode, cyclic to the last track,
if it is in the first track.
In program Entry mode:
Change to the previous track (file) for program select.
In play mode, pause mode, program play mode:
Single pressed, skip the playing track (file) to precious track(file) for normal
play/pause mode, to previous program index track(file) for program
play/pause mode.
Continue pressed, fast reverse during play/pause when pressed more
than 0.7sec.
In stop mode:
Skip the starting play folder to next folder during stop mode, cyclic to the
first folder if it is in the last folder.
In program entry mode:
Change the file for program select to next folder's first file, cyclic to the
first folder if it is in the last folder.
In normal play mode:
Skip the playing file to the next folder's first file.
Panel Remote
Keys
