6
Operating the dynamic wired microphone.
To use a cable microphone, simply plug it into any MIC IN socket. The unique Neutrik combo
socket accepts both phone and Cannon jack. Rotate the dedicated volume control knob and
master volume control, amplified sound could be heard from the speaker when voice is spoken
into the cable microphone.
Operation of system with CD / Digital Player with USB-Interface .
This operation is valid for version of Focus 505 with built-in " CD / Digital Player with USB-
Interface ".
To operate, first turn on the Master power switch and then turn on the CD power cum volume
control switch a little until LED next to it glow. The LCD panel on the player will be lighted up and
normal operation is ready. To insert a CD, just push it into the CD slot and the mechanism will
suck it in automatically.
Rotate the Power cum Volume control knob to adjust the volume of the player. For Bass and
Treble setting, adjust the designated controls respectively. Clockwise direction to either control
is to boost and counterclockwise is to back off its level.
For more details, please refer to the explanation on " CD / Digital Player with USB-Interface "
controls and functions.
Operation of system with Digital Recorder.
This operation is valid for version of Focus 505 with built-in " Digital Recorder " .
To operate, first turn on the Master power switch and then press the designated
power button of this module. The LCD display will be lighted up and Volume setting
can be done by rotating the knob. For Bass and Treble setting, adjust the designated
controls respectively. Clockwise direction to either control is to boost and
counterclockwise is to back off its level.
For more details, please refer to the explanation of " Digital Recorder " controls and
functions.
1.Making changes to CHANNEL / FREQUENCY:
Use UP or DOWN button to go to the CHANNEL /FREQUENCY page.
The cursor will flash to allow changes to be made. Pressing UP or DOWN button
will increase or decrease the channel number. The corresponding frequency will
change accordingly. When a desired channel(frequency) is being selected, it will
be automatically saved and stored in the memory.
2.Making changes to Battery selection:
Use UP or DOWN button to go to the Battery selection page.
Press SET for about 2 seconds to activate the cursor. Press UP or DOWN button to
move the cursor to either NiMH ( rechargeable battery ) or AKLN ( Alkaline battery )
position.
When the desired option has been selected, press SET for about 2 seconds to
save and store the data in the memory.
Making changes to various settings in Beltpack
Transmitter.
Remark : When changing transmitter frequencies, care should be taken
to avoid causing interference to other channels / users.
Remark : NiMH battery must be selected when rechargeable battery is
being used. Never select AKLN ( Alkaline ) when transmitter is intended
for charging as Alkaline battery can not be charged ! Wrong selection of
battery will result in battery sensing electronics to display wrong and
mislead status information.
17
