Chevrolet Traverse 2013 Owner'S Manual Download Page 235

Page: 235 / 444

Black plate (55,1)

Chevrolet Traverse Owner Manual - 2013 - CRC 2nd Edition - 11/13/12

Infotainment System

7-55

See

Satellite Radio (Radio without

Touchscreen) on page 7

‑

Satellite Radio (Radio with
Touchscreen) on page 7

‑

(if

equipped), for more information
about XM Categories.

The Radio Settings are:

Phone Settings

See

Bluetooth on page 7

‑

in the

“

Phone

”

section for more

information on phone settings.

Vehicle Settings

See

Vehicle Personalization (With

DIC Buttons) on page 5

‑

Display

Mode:

Press Mode to change the

screen background. This setting
controls map colors.

Calibrate Touchscreen:

Press to

display the Touchscreen Calibration
Screen.

Turn Display Off:

Press to turn the

Display option off.

Rear Vision Camera (If
Equipped)

The rear vision camera can assist
the driver when backing up by
displaying a view of the area behind
the vehicle.

An image appears on the system

’

screen so that the driver can check
the surroundings for safety.

Press the Config button to access
the Display settings. Adjust the
brightness of the screen by pressing
the

−

or + screen button. See

Rear

Vision Camera (RVC) on page 9

‑

Summary of Contents for Traverse 2013





























































































































































































































































































































































































































































Search results

Summary of Contents for Traverse 2013

Reviews:

Chevrolet Traverse 2013, Owner'S Manual, Page: 235 / 444

Search results

Summary of Contents for Traverse 2013

Reviews: