Chevrolet Traverse 2013 Owner'S Manual Download Page 17

Page: 17 / 444

Black plate (11,1)

Chevrolet Traverse Owner Manual - 2013 - CRC 2nd Edition - 11/13/12

In Brief

1-11

The passenger airbag status
indicator will light on the instrument
panel when the vehicle is started.
See

Passenger Sensing System on

page 3

‑

Mirror Adjustment

Exterior Mirrors

Base Model

To adjust the mirrors:

1. Press

to select a mirror.

2. Press the control pad to adjust

the mirror.

3. Return the switch to the center

to deselect the mirror.

Uplevel Model

To adjust the mirrors:

1. Press (1) or (2) to select a

mirror.

2. Press the control pad to adjust

the mirror.

3. Press (1) or (2) again to deselect

the mirror.

Folding Mirrors

For vehicles with manual folding
mirrors, push the mirror toward the
vehicle. Pull the mirror out to return
to its original position.

For vehicles with power folding
mirrors:

1. Press (1) to fold the mirrors out

to the driving position.

2. Press (2) to fold the mirrors in to

the folded position.

See

Folding Mirrors on page 2

‑

Summary of Contents for Traverse 2013





























































































































































































































































































































































































































































Search results

Summary of Contents for Traverse 2013

Reviews:

Chevrolet Traverse 2013, Owner'S Manual, Page: 17 / 444

Search results

Summary of Contents for Traverse 2013

Reviews: