Chevrolet Traverse 2013 Owner'S Manual Download Page 23

Page: 23 / 444

Black plate (17,1)

Chevrolet Traverse Owner Manual - 2013 - CRC 2nd Edition - 11/13/12

In Brief

1-17

Vehicle Features

Radio(s)

Radio without Touchscreen

Press to turn the system on

and off. Turn to increase or
decrease the volume.

BAND:

Press to choose between

FM, AM, or SiriusXM

, if equipped.

Select radio stations.

Seek or scan stations.

Change the display between the

radio station frequency and the
time, if equipped. While the ignition
is off, press

to display the time.

For more information about these
and other radio features, see

Operation (Radio without
Touchscreen) on page 7

‑

Operation (Radio with Touchscreen)
on page 7

‑

For vehicles with a Rear Audio
Controller (RAC). See

Rear Audio

Controller (RAC) on page 7

‑

For vehicles with a Rear Seat
Entertainment (RSE). See the
infotainment manual.

Summary of Contents for Traverse 2013





























































































































































































































































































































































































































































Search results

Summary of Contents for Traverse 2013

Reviews:

Chevrolet Traverse 2013, Owner'S Manual, Page: 23 / 444

Search results

Summary of Contents for Traverse 2013

Reviews: