Chevrolet Tavera Owner'S Manual Download Page 65

Page: 65 / 205

L
O
C

Child-proof door locks

Rear doors can be locked by closing the door with the child-proof lever pushed

towards arrow. Rear doors can not be opened from inside regardless of the

position of the lock button.

To unlock the child-proof lock, open the door from the outside and slide lever

away from the arrow.

Driver's seat

Seat adjuster

The driver's seat can be moved forward or backward for your comfort.

Pull the seat adjuster at the front lower part of the seat upward, so that the seat can

be moved forward or backward as desired.

After adjusting the seat position, push the seat forward and backward to make sure

the seat adjuster has latched.

WARNING

Do not adjust the driver's seat while the vehicle is moving.

The movement of the seat could cause the driver to lose control of the vehicle.

Summary of Contents for Tavera














































































































































































































Search results

Summary of Contents for Tavera

Reviews:

Related manuals for Tavera

Brands by name

Popular brands

Chevrolet Tavera, Owner'S Manual

Search results

Summary of Contents for Tavera

Reviews:

Related manuals for Tavera

Brands by name

Popular brands