Chevrolet Silverado 2003 Owner'S Manual Download Page 448

Page: 448 / 556

Windshield Wiper Blade
Replacement

Windshield wiper blades should be inspected at least
twice a year for wear and cracking. See

At Least Twice

a Year on page 6-13 for more information.

Replacement blades come in different types and are
removed in different ways. For proper type and length,
see

Normal Maintenance Replacement Parts on

page 5-121.

To replace the windshield wiper blade assembly do the
following:

1. Lift the wiper arm and turn the blade until it is

facing away from the windshield.

2. Push the release lever and slide the wiper assembly

toward the driver’s side of the vehicle.

3. Install a new blade by reversing Steps 1 and 2.

5-68

Summary of Contents for Silverado 2003













































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Silverado 2003

Reviews:

Related manuals for Silverado 2003

Brands by name

Popular brands

Chevrolet Silverado 2003, Owner'S Manual

Search results

Summary of Contents for Silverado 2003

Reviews:

Related manuals for Silverado 2003

Brands by name

Popular brands