Chevrolet Silverado 2003 Owner'S Manual Download Page 152

Page: 152 / 556

OnStar

Steering Wheel Controls

: If your vehicle is

equipped with the steering
wheel control buttons
you can use them
to interact with the OnStar

system.

See the OnStar

manual provided with your vehicle for

more information.

Storage Areas

Your vehicle includes a number of storage
compartments for storage of often-used items.

Some vehicles have storage areas in the instrument
panel. Use these spaces for items such as gloves
or small books.

Some models have a storage pocket on each of the
front doors.

Some vehicles have a storage area behind the seat.

Glove Box

To open your glove box, pull the lever upward and pull
the door downward.

Cupholder(s)

Your vehicle may have cupholders located in the front
console, or in the fold-down armrest.

2-64

Summary of Contents for Silverado 2003













































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Silverado 2003

Reviews:

Brands by name

Popular brands

Chevrolet Silverado 2003, Owner'S Manual

Search results

Summary of Contents for Silverado 2003

Reviews:

Brands by name

Popular brands