Chevrolet Silverado 2003 Owner'S Manual Download Page 119 | Manualshive

Page: 119 / 556

background image

Six-Speed (VORTEC™ 8100 V8 and
DURAMAX™ 6600 V8 Engines)

Here’s how to operate your
transmission.

This six-speed pattern is unique to GM manual
transmissions. The transmission always repositions the
shift lever to NEUTRAL, which is located between
FOURTH (4) and FIFTH (5) gear.

To prevent unintentional gear selections, additional
force is required to move the shift lever into
REVERSE (R) or FIRST (1). Use FIRST (1) when trailer
towing, driving with payload in the pickup box or
launching on a grade. Otherwise, start in SECOND (2)
gear. Only shift into FIRST (1) when the vehicle has
stopped moving.

During the first 500 miles (805 km) of vehicle use, start
the vehicle moving in FIRST (1) gear. This allows
the clutch components to wear-in properly.

FIRST (1): With the vehicle at a stop, release the
brake, press the clutch pedal and shift into FIRST (1).
Then, slowly let up on the clutch pedal as you press the
accelerator pedal. Only downshift into FIRST (1)
when the vehicle has come to a complete stop. If the
shift lever will not go into FIRST (1), put the lever
in NEUTRAL and let up on the clutch pedal to fully
engage the clutch. Press the clutch pedal again. Then,
shift into FIRST (1).

SECOND (2): With the vehicle at a stop, release the
brake, press the clutch pedal and shift into SECOND (2).
Then, slowly let up on the clutch pedal as you press
the accelerator pedal. With the vehicle moving, press the
clutch pedal and upshift into SECOND (2) from
FIRST (1) while applying light pressure to the right on
the shifter. Then, slowly let up on the clutch pedal
as you press the accelerator pedal. If you come to a
complete stop and the shift lever will not go into
SECOND (2), put the lever in NEUTRAL and let up on
the clutch pedal to fully engage the clutch. Press
the clutch pedal again. Then, shift into SECOND (2).

THIRD (3): Press the clutch pedal and upshift into
THIRD (3). Then, slowly let up on the clutch pedal as
you press the accelerator pedal.

2-31

«
...
117
118
119
120
121
...
»

Summary of Contents for Silverado 2003













































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Silverado 2003

10-8002-C11998B

Brand: Saleen Pages: 12

2013 Buick Verano

Brand: Buick Pages: 5

Brand: Phonocar Pages: 2

Brand: Mini Pages: 20

Brand: Right Weigh Pages: 16

Brand: Easee Pages: 12

TRI-FOLD PG9300RF

Brand: Pet Gear Pages: 4

Brand: Hama Pages: 4

Brand: Volvo Pages: 230

Brand: Gator Pages: 8

Brand: benbat Pages: 14

Brand: SPL Pages: 5

Brand: GAC MOTOR Pages: 356

Brand: Oypla Leisure Pages: 4

Brand: Mercedes-Benz Pages: 91

Brand: Xpresskit Pages: 18

Brand: Thule Pages: 3

Brand: Saab Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands