Chevrolet 2015 Cruze Page 29 Owner'S Manual Download | Manualshive

Page: 29 / 419

background image

Black plate (22,1)

Chevrolet Cruze Owner Manual (GMNA-Localizing-U.S./Canada-7707493) -

2015 - crc - 7/24/14

1-22

In Brief

Diesel Exhaust Fluid

Diesel Exhaust Fluid (DEF) is used
with diesel engines to reduce the
amount of regulated emissions
produced. The DEF system must be
maintained for the vehicle to run
properly. It is normal to hear the
DEF system purge fluid back into
the tank after the vehicle is shut off.

Locating Diesel Exhaust Fluid

DEF can be purchased at a
Chevrolet dealer. It can also be
purchased at authorized vehicle
dealerships. Additionally, some
diesel fueling stations or retailers
may have DEF for purchase. For
vehicles with an active OnStar

®

subscription, OnStar can help to
locate a DEF retailer. See

“

Customer Assistance Offices

”

in

the owner manual for phone
numbers to assist you in contacting
a GM dealer. See

Recommended

Fluids and Lubricants on
page 11-12

.

As the DEF tank becomes low on
fluid, warnings begin with
approximately
1 600 km (1,000 miles) of remaining
range. These warnings will increase
in intensity as the tank becomes
empty. Once the tank is empty, the
vehicle speed will be limited. If there
is an issue with the quality of the
fluid or the exhaust fluid system,
warnings will be displayed in the
Driver Information Center (DIC).
See

Diesel Exhaust Fluid on

page 9-27

.

Roadside Assistance
Program

U.S.: 1-800-243-8872

TTY Users (U.S. Only):
1-888-889-2438

Canada: 1-800-268-6800

As the owner of a new Chevrolet,
you are automatically enrolled in the
Roadside Assistance program.

See

Roadside Assistance Program

on page 13-5

.

OnStar

®

This vehicle may be equipped with a
comprehensive, in-vehicle system
that can connect to a live OnStar
Advisor for Emergency, Security,
Navigation, Connection, and
Diagnostic Services. OnStar
services may require a paid
subscription. See

OnStar Overview

on page 14-1

.

«
...
27
28
29
30
31
...
»

Summary of Contents for 2015 Cruze




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 Cruze

Brand: ZAPTEC Pages: 240

PRIME DESIGN VRI3-E-PM11

Brand: Safe Fleet Pages: 12

Brand: DEFA Pages: 9

Slim Line LED Light Grille Kit

Brand: rough country Pages: 8

Brand: Sirius Satellite Radio Pages: 8

MagicComfort MSH200

Brand: Waeco Pages: 108

Brand: Tusk Pages: 2

Brand: Mercedes-Benz Pages: 368

Brand: Toro Pages: 24

Brand: Beper Pages: 52

Brand: DriveRight Pages: 16

Brand: INDIWORK Pages: 18

Brand: Opel Pages: 103

Brand: Huf Pages: 6

Brand: Volvo Pages: 10

Brand: Ranger design Pages: 22

Brand: Honda Pages: 330

Brand: Crux Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands