manualshive.com logo in svg

Chevrolet 2015 Cruze, Owner'S Manual

The Chevrolet 2015 Cruze Owner's Handbook Manual is essential for every car owner. Browse our website today to download this comprehensive manual for free, providing you with vital information on vehicle maintenance, safety, and troubleshooting. Unlock its potential by visiting manualshive.com and ensuring a seamless driving experience.

Share
Download
background image

Black plate (21,1)

Chevrolet Cruze Owner Manual (GMNA-Localizing-U.S./Canada-7707493) -

2015 - crc - 7/24/14

Driving and Operating

9-21

If the Diesel Engine Will Not
Start

If you have run out of fuel, see

Running Out of Fuel (Diesel) on
page 9-60

.

If the vehicle is not out of fuel, and
the engine will not start:

Turn the ignition key to ON/RUN.
After the Wait-To-Start light goes off,
turn the ignition key to START.

If the light does not go off, wait a
few seconds, then try starting the
engine again. See your dealer for a
starting system check.

If the light comes on and then goes
off, and it is known that the batteries
are charged, but the engine still will
not start, the vehicle needs service.

If the light does not come on when
the engine is cold, the vehicle
needs service.

If the batteries do not have enough
charge to start the engine, see

Battery on page 10-28

.

Check that the correct engine oil
has been used and changed at
appropriate intervals. If the wrong oil
is used, the engine may be harder
to start.

Be sure you are using the proper
fuel for existing weather conditions.
See

Fuel for Diesel Engines on

page 9-53

.

If the engine starts, runs a short
time, then stops, the vehicle needs
service.

{

Warning

Do not use gasoline or starting
aids, such as ether, in the air
intake. They could damage the
engine, which may not be
covered by the vehicle warranty.
They could also cause a fire,
which could cause serious
personal injury.

Engine Heater

The gasoline engine heater and
diesel engine oil heater, if equipped,
can help in cold weather conditions
at or below

−

18°C (0°F) for easier

starting and better fuel economy
during engine warm-up. Plug in the
heater at least four hours before
starting the vehicle. An internal
thermostat in the plug end of the
1.4L engine

’

s cord will prevent

engine heater operation at
temperatures above

−

18°C (0°F).

Summary of Contents for 2015 Cruze




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 Cruze

Kargo Master 80070 Assembly Lnstructions preview
80070
Brand: Kargo Master Pages: 13
Kargo Master 4A96L Installation Manual preview
4A96L
Brand: Kargo Master Pages: 21
Kargo Master 40201 Installation Manual preview
40201
Brand: Kargo Master Pages: 4
SAF-HOLLAND FleetMaster Air FW8 Series Owner'S Manual preview
FleetMaster Air FW8 Series
Brand: SAF-HOLLAND Pages: 20
Monacor CARPOWER CAP-12XHQ Manual preview
CARPOWER CAP-12XHQ
Brand: Monacor Pages: 5
Jeep Grand Cherokee WK2 Owner'S Manual preview
Grand Cherokee WK2
Brand: Jeep Pages: 338
Mobile Create MCM3 Instruction Manual preview
MCM3
Brand: Mobile Create Pages: 15
DEFA 412737 Fitting Instructions Manual preview
412737
Brand: DEFA Pages: 7
Prorack K869 Fitting Instructions Manual preview
K869
Brand: Prorack Pages: 15
HAUL MASTER 41782 Assembly And Operating Instructions Manual preview
41782
Brand: HAUL MASTER Pages: 8
Rigid Hitch BULL BAR Installation Instructions preview
BULL BAR
Brand: Rigid Hitch Pages: 2
Ranger design 1525-NSX Quick Start Manual preview
1525-NSX
Brand: Ranger design Pages: 22
Curt Group Aries AL235045 Installation Manual preview
Aries AL235045
Brand: Curt Group Pages: 2
Rosco STSK4730 Installation & User Manual preview
STSK4730
Brand: Rosco Pages: 12
Honda 2007 Pilot Installation Instructions Manual preview
2007 Pilot
Brand: Honda Pages: 7
Kuda-Phonebase 296570 Installation Instruction preview
296570
Brand: Kuda-Phonebase Pages: 6
Purpleline Nemesis Ultra FNU200 User Manual preview
Nemesis Ultra FNU200
Brand: Purpleline Pages: 4
SportRack EXPLORER A90095 Instruction Sheet preview
EXPLORER A90095
Brand: SportRack Pages: 6

Brands by name

Popular brands

Load more brands