manualshive.com logo in svg

Chevrolet 2012 Malibu, Owner'S Manual

The Chevrolet 2012 Malibu Owner's Manual is an essential guide for every Malibu owner. This comprehensive manual provides detailed instructions and information on all aspects of your vehicle. Download this manual for free from manualshive.com and gain valuable insights to maximize your Malibu's performance and enjoyment.

Share
Download
background image

Black plate (25,1)

Chevrolet Malibu Owner Manual - 2012

Instruments and Controls

5-25

Vehicle Messages

The following messages appear if
there is a problem detected in one
of your vehicle's systems.

A message clears when the
vehicle's condition is no longer
present. To acknowledge a
message and clear it from the
display, press and hold any of the
DIC buttons. If the condition is still
present, the warning message
comes back on the next time the
vehicle is turned off and back on.
With most messages, a warning
chime sounds when the message
displays. Your vehicle may have
other warning messages.

Brake System Messages

BRAKE FLUID

This message displays, while the
ignition is on, when the brake fluid
level is low. The brake system
warning light on the instrument
panel cluster also comes on. See

Brake System Warning Light on

page 5

‑

17

for more information.

Have the brake system serviced by
your dealer as soon as possible.

PUSH PARK PEDAL

This message displays if the parking
brake is left engaged. See

Parking

Brake on page 9

‑

26

for more

information.

Cruise Control Messages

CRUISE ENGAGED

This message displays when the
cruise control system is active. See

Cruise Control on page 9

‑

31

for

more information.

Door Ajar Messages

DOOR AJAR

This message displays if one or
more of the vehicle's doors are not
closed properly. Make sure that the
door(s) are closed completely.

TRUNK AJAR

This message displays when the
trunk is not closed completely. Make
sure that the trunk is closed
completely. See

Trunk on page 2

‑

9

for more information.

Engine Oil Messages

CHANGE OIL SOON

This message displays when the life
of the engine oil has expired and it
should be changed.

When this message is
acknowledged and cleared from the
display, the engine oil life system
must still be reset separately. See

Engine Oil Life System on
page 10

‑

11

,

Engine Oil on

page 10

‑

8

, and

Maintenance

Schedule on page 11

‑

3

for more

information.

Summary of Contents for 2012 Malibu

























































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Malibu

Eaton Green Motion Building Quick Start Manual preview
Green Motion Building
Brand: Eaton Pages: 12
Brodit ProClip 853660 Manual preview
ProClip 853660
Brand: Brodit Pages: 2
Power Fist 8985988 Manual preview
8985988
Brand: Power Fist Pages: 12
EAL EUFAB 16491 Operating Instructions Manual preview
EUFAB 16491
Brand: EAL Pages: 7
Ford Windstar 2003 Quick Reference Manual preview
Windstar 2003
Brand: Ford Pages: 2
EZTRUNK PHANTOM JK Assembly Manual preview
PHANTOM JK
Brand: EZTRUNK Pages: 3
Ranger design 1506-PHX Cargo Plus Installation Manual preview
1506-PHX Cargo Plus
Brand: Ranger design Pages: 8
AUTOTECH 10.411.01.219K Installation Instructions preview
10.411.01.219K
Brand: AUTOTECH Pages: 1
TAUBENREUTHER 16-5911 Manual preview
16-5911
Brand: TAUBENREUTHER Pages: 18
Ford C-Max Energi 2014 Quick Reference Manual preview
C-Max Energi 2014
Brand: Ford Pages: 10
Husky 31564 Assembly, Installation, Operation And Maintenance Instructions preview
31564
Brand: Husky Pages: 8
Istar PI00670 Instruction Manual preview
PI00670
Brand: Istar Pages: 6
KAP HK CARPLAY 10w Instruction Manual preview
HK CARPLAY 10w
Brand: KAP Pages: 22
Honda 2002 Accord Coupe Owner'S Manual preview
2002 Accord Coupe
Brand: Honda Pages: 367
HAKR HV 1191 Instructions For Use Manual preview
HV 1191
Brand: HAKR Pages: 10
Cadillac 2007 DTS Owner'S Manual preview
2007 DTS
Brand: Cadillac Pages: 508
Kia 2007 Magentis Owner'S Manual preview
2007 Magentis
Brand: Kia Pages: 289
Chevrolet CORVETTE 427 Release Note preview
CORVETTE 427
Brand: Chevrolet Pages: 6

Brands by name

Popular brands

Load more brands