Chevrolet 2012 Malibu Owner'S Manual Download Page 295

Page: 295 / 376

Black plate (67,1)

Chevrolet Malibu Owner Manual - 2012

Vehicle Care

10-67

2. Remove the spare tire cover.

3. Turn the wing nut

counterclockwise and remove it.
Then remove the compact spare
tire. See

Compact Spare Tire on

page 10

‑

for more information.

4. Remove the wing nut holding the

jack in place.

5. Remove the jack and wheel

wrench from the trunk.

Tire Changing Tools

A. Wheel Wrench

B. Jack

The tools you will be using include
the wheel wrench (A) and jack (B).

1. Turn the wing nut

counterclockwise to loosen
wheel wrench.

2. Unhook the wheel wrench from

the jack.

Summary of Contents for 2012 Malibu

























































































































































































































































































































































































Search results

Summary of Contents for 2012 Malibu

Reviews:

Related manuals for 2012 Malibu

Brands by name

Popular brands

Chevrolet 2012 Malibu, Owner'S Manual

Search results

Summary of Contents for 2012 Malibu

Reviews:

Related manuals for 2012 Malibu

Brands by name

Popular brands