Chevrolet 2009 Uplander Owner'S Manual Download Page 79

Page: 79 / 464

2. Unlatch the harness by pushing the button on the

buckle.

3. Move one side of the harness off the child’s

shoulder.

4. Move the other side of the harness off the child’s

shoulder.

5. Remove the child from the child restraint cushion.

Storing the Built-In Child Restraint

Always properly store the built-in child restraint before
using the vehicle’s lap-shoulder belt.

1. Move both latch plates and both sides of the

shoulder harness clip to the bottom of the harness
straps.

1-75

Summary of Contents for 2009 Uplander

















































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Uplander

Reviews:

Brands by name

Popular brands

Chevrolet 2009 Uplander, Owner'S Manual

Search results

Summary of Contents for 2009 Uplander

Reviews:

Brands by name

Popular brands