Chevrolet 2009 Uplander Owner'S Manual Download Page 155

Page: 155 / 464

4. Firmly press down making sure the latch is flat with

the ribs (A) on the storage bin.

5. Switch hands and repeat Steps 2 through 4 for the

latch on the opposite side of the storage bin.

6. Reverse these steps in order to remove the

storage bin.

If your bin is equipped with the hand size latches do the
following:

1. Place the storage bin on to the rails in the desired

location.

2. Push firmly upward on the bin while supporting it

with one hand.

3. The bin will snap into place.

4. To remove the bin, support the bin with one hand

while pulling each latch up and away from the bin.

The contents of the bin should never weigh more than
1.5 lbs (0.7 kg).

Always make sure to close and latch the bin before
driving.

2-57

Summary of Contents for 2009 Uplander

















































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Uplander

Reviews:

Brands by name

Popular brands

Chevrolet 2009 Uplander, Owner'S Manual

Search results

Summary of Contents for 2009 Uplander

Reviews:

Brands by name

Popular brands