Chevrolet 2009 Uplander Owner'S Manual Download Page 154

Page: 154 / 464

Overhead Console (With Rail)

If your vehicle is equipped with an overhead console, it
may contain the following:

•

Reading lamps. See Front Reading Lamps on
page 3-17 or Rear Reading Lamps on page 3-17.

•

Switchbank. See Overhead Console Switchbank on
page 3-19.

•

OnStar

System buttons. See OnStar

System on

page 2-47.

•

Universal Home Remote buttons. See Universal
Home Remote System on page 2-50.

See your dealer to purchase additional items for the rail
system.

Storage Bin

Your vehicle may have a storage bin located on the
overhead rail that you can use for storage.

If your bin is equipped with the finger size latches do
the following:

1. Place the storage bin on to the rails in the desired

location.

2. Push firmly upward on the bin while supporting it

with one hand.

3. Push in on the latch and then rotate it 90 degrees.

2-56

Summary of Contents for 2009 Uplander

















































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Uplander

Reviews:

Brands by name

Popular brands

Chevrolet 2009 Uplander, Owner'S Manual

Search results

Summary of Contents for 2009 Uplander

Reviews:

Brands by name

Popular brands