Chevrolet 2009 Uplander Owner'S Manual Download Page 166

Page: 166 / 464

Hazard Warning Flashers

(Hazard Warning Flasher): Press this button

located on the instrument panel, to make the front and
rear turn signal lamps flash on and off. This warns
others that you are having trouble.

Press

again to turn the flashers off.

Other Warning Devices

If you carry reflective triangles, you can set them up at
the side of the road about 300 feet (100 m) behind
your vehicle.

Horn

Press near or on the horn symbols on the steering
wheel pad to sound the horn.

Tilt Wheel

A tilt wheel lets the steering wheel position be adjusted.

The adjustment lever is located on the left side of the
steering column.

Pull the lever to move the steering wheel up or down.
Release the lever to lock the wheel in place.

Do not adjust the tilt lever while driving.

3-6

Summary of Contents for 2009 Uplander

















































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Uplander

Reviews:

Brands by name

Popular brands

Chevrolet 2009 Uplander, Owner'S Manual

Search results

Summary of Contents for 2009 Uplander

Reviews:

Brands by name

Popular brands