Chevrolet 2008 Silverado 1500 Pickup Owner'S Manual Download Page 529

Page: 529 / 596

Vehicle Care/Appearance Materials

Description

Usage

Polishing Cloth

Interior and exterior
polishing cloth.

Tar and Road
Oil Remover

Removes tar, road oil,
and asphalt.

Chrome Cleaner
and Polish

Use on chrome or
stainless steel.

White Sidewall
Tire Cleaner

Removes soil and black
marks from whitewalls
and raised white lettering.

Vinyl Cleaner

Cleans vinyl.

Glass Cleaner

Removes dirt, grime,
smoke and fingerprints.

Chrome Wheel Cleaner

Removes dirt and grime
from chrome wheels.

Finish Enhancer

Removes dust,
fingerprints, and surface
contaminants. Spray on
and wipe off.

Description

Usage

Swirl Remover Polish

Removes swirl marks, fine
scratches, and other light
surface contamination.

Cleaner Wax

Removes light scratches
and protects finish.

Foaming Tire Shine
Low Gloss

Cleans, shines, and
protects tires. No wiping
necessary.

Wash Wax Concentrate

Medium foaming
shampoo. Cleans and
lightly waxes.
Biodegradable and
phosphate free.

Spot Lifter

Quickly removes spots
and stains from carpets,
vinyl, and cloth upholstery.

Odor Eliminator

Odorless spray odor
eliminator used on fabrics,
vinyl, leather and carpet.

5-123

Summary of Contents for 2008 Silverado 1500 Pickup





















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Silverado 1500 Pickup

Reviews:

Related manuals for 2008 Silverado 1500 Pickup

Brands by name

Popular brands

Chevrolet 2008 Silverado 1500 Pickup, Owner'S Manual

Search results

Summary of Contents for 2008 Silverado 1500 Pickup

Reviews:

Related manuals for 2008 Silverado 1500 Pickup

Brands by name

Popular brands