manualshive.com logo in svg

Chevrolet 2008 Silverado 1500 Pickup, Owner'S Manual

The Chevrolet 2008 Silverado 1500 Pickup Owner's Manual is an essential guide for all Chevy truck owners. This comprehensive manual covers every aspect of your vehicle, providing detailed instructions and information. Download it for free from our website, ensuring you have the knowledge to maximize your Silverado's performance and durability.

Share
Download
background image

Starting and Operating
Your Vehicle

New Vehicle Break-In

Notice:

Your vehicle does not need an elaborate

break-in. But it will perform better in the long run if
you follow these guidelines:

•

Keep your speed at 55 mph (88 km/h) or less for
the first 500 miles (805 km).

•

Do not drive at any one constant speed, fast or
slow, for the first 500 miles (805 km). Do not
make full-throttle starts. Avoid downshifting
to brake or slow the vehicle.

•

Avoid making hard stops for the first 200 miles
(322 km) or so. During this time the new brake
linings are not yet broken in. Hard stops with
new linings can mean premature wear and earlier
replacement. Follow this breaking-in guideline
every time you get new brake linings.

•

Do not tow a trailer during break-in. See

Towing

a Trailer on page 4-55

for the trailer towing

capabilities of your vehicle and more
information.

Following break-in, engine speed and load can be
gradually increased.

Ignition Positions

Use the key to turn the
ignition switch to four
different positions.

In order to shift out of PARK (P), ignition must be in the
ON/RUN or ACC/ACCESSORY and the regular brake
pedal must be applied.

A (LOCK/OFF):

This position locks the ignition and

transmission. It is a theft-deterrent feature. The key
can only be removed when the ignition is turned to
LOCK/OFF.

Notice:

Using a tool to force the key from the

ignition switch could cause damage or break the
key. Use the correct key and turn the key only with
your hand. Make sure the key is all the way in.
If it is, turn the steering wheel left and right while
you turn the key hard. If none of this works,
then your vehicle needs service.

2-22

Summary of Contents for 2008 Silverado 1500 Pickup





















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Silverado 1500 Pickup

Whispbar K561W Fitting Instructions Manual preview
K561W
Brand: Whispbar Pages: 15
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
BMW E39/2 Installation Instructions Manual preview
E39/2
Brand: BMW Pages: 21
Rati Armster 2 User Manual preview
Armster 2
Brand: Rati Pages: 2
SuperATV Roof Installation Instructions Manual preview
Roof
Brand: SuperATV Pages: 7
Great Wall WEY VV5 Service Manual preview
WEY VV5
Brand: Great Wall Pages: 18
WIX WP9378 Installation Instruction preview
WP9378
Brand: WIX Pages: 2
Black Horse Off Road TO20 Installation Instructions Manual preview
TO20
Brand: Black Horse Off Road Pages: 7
Cadillac Fleetwood Brougham Sedan 1966 Owner'S Manual preview
Fleetwood Brougham Sedan 1966
Brand: Cadillac Pages: 56
Fiat 500L 2020 Owner'S Manual preview
500L 2020
Brand: Fiat Pages: 284
Oldsmobile Bravada 1997 Owner'S Manual preview
Bravada 1997
Brand: Oldsmobile Pages: 358
Rugged Ridge 53701.52 Installation Manual preview
53701.52
Brand: Rugged Ridge Pages: 5
WABCO TEBS E Manual preview
TEBS E
Brand: WABCO Pages: 224
Scosche MAGICGRIP MGQDWD-CPO Instructions Manual preview
MAGICGRIP MGQDWD-CPO
Brand: Scosche Pages: 12
Oldsmobile 1994 88 Owner'S Manual preview
1994 88
Brand: Oldsmobile Pages: 276
Volkswagen PASSAT CC - Brochure preview
PASSAT CC -
Brand: Volkswagen Pages: 32
AUTOTECH 10.109.418K Installation Instructions preview
10.109.418K
Brand: AUTOTECH Pages: 4
Waeco MagicWatch MWE150 Installation And Operating Manual preview
MagicWatch MWE150
Brand: Waeco Pages: 176

Brands by name

Popular brands

Load more brands