Chevrolet 2008 Impala Owner'S Manual Download Page 79 | Manualshive

Page: 79 / 400

Chevrolet 2008 Impala Owner'S Manual Download Page 79

Remote Keyless Entry (RKE)
System Operation

The vehicle’s doors can be locked and unlocked, and
the trunk can be unlatched from about 3 feet (1 m)
up to 65 feet (20 m) away with the Remote Keyless
Entry (RKE) transmitter.

If your vehicle has the remote start feature you can also
start your vehicle with the RKE transmitter. Your RKE
transmitter, with the remote start button, provides
an increased range of 195 feet (60 m) away. However,
the range may be less while the vehicle is running.
As a result, you may need to be closer to your vehicle
to turn it off than you were to turn it on.

There are other conditions which can affect the
performance of the transmitter. See Remote Keyless
Entry (RKE) System on page 2-4.

The following functions may be available if your vehicle
has the RKE system:

/

(Remote Vehicle Start): If your vehicle has this

feature, it may be started from outside the vehicle using
the RKE transmitter. See Remote Vehicle Start on
page 2-8 for additional information.

RKE with Remote Start

RKE without Remote

Start

2-5

«
...
77
78
79
80
81
...
»

Summary of Contents for 2008 Impala

















































































































































































































































































































































































































Reviews:

No comments