Home
/
Chevrolet
/
2008 Impala
/
Owner'S Manual

Chevrolet 2008 Impala, Owner'S Manual, Page: 302 / 400

Share

Page: 302 / 400

Chevrolet 2008 Impala Owner'S Manual Download Page 302

(E) Tire Ply Material

:

The type of cord and

number of plies in the sidewall and under
the tread.

(F) Uniform Tire Quality Grading (UTQG)

:

Tire manufacturers are required to grade
tires based on three performance factors:
treadwear, traction, and temperature resistance.
For more information see Uniform Tire Quality
Grading on page 5-73.

(G) Maximum Cold Inflation Load Limit

:

Maximum load that can be carried and the
maximum pressure needed to support that load.

(A) Temporary Use Only

:

The compact spare tire

or temporary use tire has a tread life of
approximately 3,000 miles (5 000 km) and should
not be driven at speeds over 65 mph (105 km/h).
The compact spare tire is for emergency use when
a regular road tire has lost air and gone flat.
If your vehicle has a compact spare tire,
see Compact Spare Tire on page 5-89 and If a
Tire Goes Flat on page 5-77.

Compact Spare Tire Example

5-56

«
...
300
301
302
303
304
...
»

Summary of Contents for 2008 Impala

















































































































































































































































































































































































































Reviews:

No comments