Chevrolet 2008 Impala Owner'S Manual Download Page 129

Page: 129 / 400

The main components of your instrument panel are listed here:

A. Air Vent. See Outlet Adjustment on page 3-25.

B. Remote Trunk Release Button. See “Remote Trunk

Release” under Trunk on page 2-13.

C. Multifunction Lever. See Turn Signal/Multifunction

Lever on page 3-7.

D. Instrument Panel Cluster. See Instrument Panel

Cluster on page 3-28.

E. Hazard Warning Flasher Button. See Hazard

Warning Flashers on page 3-6.

F. Driver Information Center. See Driver Information

Center (DIC) on page 3-44.

G. Passenger Air Bag status Indicator. See Passenger

Airbag Status Indicator on page 3-32.

H. Audio System. See Audio System(s) on page 3-66.

I. Exterior Lamps Control. See Exterior Lamps on

page 3-14.

J. Instrument Panel Brightness. See Instrument Panel

Brightness on page 3-17.

K. Traction Control On/Off Button (If Equipped).

See Traction Control System (TCS) on page 4-6.

L. Tilt Steering Wheel Lever. See Tilt Wheel on

page 3-6.

M. Steering Wheel Cruise Control. See Cruise Control

on page 3-10.

N. Hood Release. See Hood Release on page 5-13.

O. Horn. See Horn on page 3-6.

P. Audio Steering Wheel Controls (If Equipped).

See Audio Steering Wheel Controls on page 3-86.

Q. Ignition Switch. See Ignition Positions on page 2-22.

R. Climate Controls. See Climate Control System on

page 3-22.

S. Accessory Power Outlets. See Accessory Power

Outlet(s) on page 3-20.

T. Center Console Shift Lever (If Equipped). See

“Console Shift Lever” under Shifting Into PARK (P)
on page 2-30.

U. Glove Box. See Glove Box on page 2-48.

3-5

Summary of Contents for 2008 Impala

















































































































































































































































































































































































































Search results

Summary of Contents for 2008 Impala

Reviews:

Chevrolet 2008 Impala, Owner'S Manual, Page: 129 / 400

Search results

Summary of Contents for 2008 Impala

Reviews: