manualshive.com logo in svg

Chevrolet 2005 Colorado, Owner'S Manual

The Chevrolet 2005 Colorado Owner's Manual is a comprehensive guide that provides essential information about operating and maintaining your vehicle. Experience hassle-free driving with this free manual download, available at manualshive.com. Obtain the necessary knowledge on proper vehicle handling and upkeep to ensure a smooth and enjoyable ride.

Share
Download
background image

{

CAUTION:

These hooks, when used, are under a lot of
force. Always pull the vehicle straight out.
Never pull on the hooks at a sideways angle.
The hooks could break off and you or others
could be injured from the chain or cable
snapping back.

Notice: Never use recovery hooks to tow the
vehicle. Your vehicle could be damaged and it would
not be covered by warranty.

Loading Your Vehicle

It is very important to know how much weight your
vehicle can carry. This weight is called the vehicle
capacity weight and includes the weight of all occupants,
cargo and all nonfactory-installed options. Two labels
on your vehicle show how much weight it may properly
carry, the Tire and Loading Information label and the
Certification/Tire label.

{

CAUTION:

Do not load your vehicle any heavier than the
Gross Vehicle Weight Rating (GVWR), or either
the maximum front or rear Gross Axle Weight
Rating (GAWR). If you do, parts on your
vehicle can break, and it can change the way
your vehicle handles. These could cause you
to lose control and crash. Also, overloading
can shorten the life of your vehicle.

4-43

Summary of Contents for 2005 Colorado

































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2005 Colorado

UltraGauge EM Installation & Operation Manual preview
EM
Brand: UltraGauge Pages: 55
Pivot DXB-B User Manual preview
DXB-B
Brand: Pivot Pages: 4
Jackco SHARP ALIGN User Manual preview
SHARP ALIGN
Brand: Jackco Pages: 11
Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
Suzuki Movano Owner'S Manual preview
Movano
Brand: Suzuki Pages: 353
Torklift F2012 Installation Instructions Manual preview
F2012
Brand: Torklift Pages: 16
Kia Picanto 2015 Quick Reference Manual preview
Picanto 2015
Brand: Kia Pages: 10
CARRYBOY CB-796IG2-CIGD-R Installation Manual preview
CB-796IG2-CIGD-R
Brand: CARRYBOY Pages: 4
GMC 2012 Terrain Owner'S Manual preview
2012 Terrain
Brand: GMC Pages: 428
Porsche 01-B Web Application Manual preview
01-B
Brand: Porsche Pages: 313
Ecco 5545A Installation And Operating Instructions Manual preview
5545A
Brand: Ecco Pages: 12
ULTIMATE SPEED 304669 Instructions For Use And Safety Manuallines preview
304669
Brand: ULTIMATE SPEED Pages: 50
Pyle PLDCP3 User Manual preview
PLDCP3
Brand: Pyle Pages: 2
Camoplast T4S Installation Manuallines preview
T4S
Brand: Camoplast Pages: 19
Maserati Grecale 2023 Owner'S Manual preview
Grecale 2023
Brand: Maserati Pages: 302
Audi Audi 80 1987 Workshop Manual preview
Audi 80 1987
Brand: Audi Pages: 63
Ford Focus 2008 Quick Reference Manual preview
Focus 2008
Brand: Ford Pages: 2
Reliant ROBIN 850 Workshop Manual preview
ROBIN 850
Brand: Reliant Pages: 206

Brands by name

Popular brands

Load more brands