Chevrolet 2005 Colorado Owner'S Manual Download Page 385

Page: 385 / 416

Usage

Fluid/Lubricant

Chassis

Lubrication

Chassis Lubricant (GM Part No.
U.S. 12377985, in Canada
88901242) or lubricant meeting
requirements of NLGI #2, Category
LB or GC-LB.

Front and Rear

Axle

SAE 75W-90 Synthetic Axle
Lubricant (GM Part No. U.S.
12378261, in Canada 10953455)
meeting GM Specification 9986115.

Transfer Case

Synchromesh Transmission Fluid
(GM Part No. U.S. 12345349, in
Canada 10953465).

Rear Driveline

Center Spline

and Universal

Joints

Chassis Lubricant (GM Part No.
U.S. 12377985, in Canada
88901242) or lubricant meeting
requirements of NLGI #2, Category
LB or GC-LB.

Constant

Velocity

Universal Joint

Chassis Lubricant (GM Part No.
U.S. 12377985, in Canada
88901242) or lubricant meeting
requirements of NLGI #2, Category
LB or GC-LB.

Usage

Fluid/Lubricant

Hood Latch

Assembly,

Secondary

Latch, Pivots,

Spring Anchor

and Release

Pawl

Lubriplate Lubricant Aerosol (GM
Part No. U.S. 12346293, in Canada
992723) or lubricant meeting
requirements of NLGI #2, Category
LB or GC-LB.

Hood and Door

Hinges, Body

Door Hinge

Pins, Liftgate

Hinge and

Linkage,

Folding Seats

and Fuel Door

Hinge

Multi-Purpose Lubricant, Superlube
(GM Part No. U.S. 12346241, in
Canada 10953474).

Outer Tailgate

Handle Pivot

Points and

Hinges

Multi-Purpose Lubricant, Superlube
(GM Part No. U.S. 12346241, in
Canada 10953474).

Weatherstrip

Conditioning

Dielectric Silicone Grease (GM Part
No. U.S. 12345579, in Canada
992887).

Weatherstrip

Squeaks

Synthetic Grease with Teflon,
Superlube (GM Part No. U.S.
12371287, in Canada 10953437).

6-13

Summary of Contents for 2005 Colorado

































































































































































































































































































































































































































Search results

Summary of Contents for 2005 Colorado

Reviews:

Brands by name

Popular brands

Chevrolet 2005 Colorado, Owner'S Manual

Search results

Summary of Contents for 2005 Colorado

Reviews:

Brands by name

Popular brands