Chevrolet 2005 Colorado, Owner'S Manual

Page: 54 / 416

Securing a Child Restraint Designed
for the LATCH System (Crew Cab)
1. Find the LATCH anchorages for the seating position
you want to use. See Lower Anchorages and Top
Tethers for Children (LATCH System) on page 1-46.
2. Put the child restraint on the seat.
3. If the child restraint is forward-facing and it has a
top tether, install the top tether according to the
instructions in Top Strap Anchor Location on
page 1-43 and also refer to your child restraint
instructions to learn about the proper use of your
top tether.
4. Attach the LATCH attachments on the child restraint
to the LATCH anchorages in the vehicle. The child
restraint instructions will show you how.
5. Tighten the LATCH attachments and the top tether.
The child restraint instructions will show you how.
6. Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, disconnect the latch
attachments, pull the seatback forward and unhook the
top tether from the top tether anchorage. Be sure to
return the seatback to its fully upright position. See Rear
Seat Operation (Crew Cab) in the Index.
Securing a Child Restraint Designed
for the LATCH System (Extended
Cab with Rear Seats)
1. Find the LATCH anchorages for the seating
position you want to use. See Lower Anchorages
and Top Tethers for Children (LATCH System)
on page 1-46.
2. Put the child restraint on the seat.
1-48