Chevrolet 2004 Classic Owner'S Manual Download Page 83 | Manualshive

Page: 83 / 348

Chevrolet 2004 Classic Owner'S Manual Download Page 83

Notice: Using the emergency trunk release handle
as a tie-down or anchor point when securing
items in the trunk may damage it. Use the
emergency trunk release handle only to help you
open the trunk lid.

There is a glow-in-the-dark emergency trunk release
handle located inside the trunk on the trunk latch. This
handle will glow following exposure to light. Pull the
release handle up to open the trunk from the inside.

Trap-Resistant Trunk Kit

To help prevent a child from becoming trapped in your
trunk, you can order a trap-resistant trunk kit from
your dealer. This kit includes:

•

a modified trunk latch,

•

a lighted release handle, and

•

seatback tethers (for vehicles with folding rear
seatbacks).

See your dealer for additional information.

2-13

«
...
81
82
83
84
85
...
»

Summary of Contents for 2004 Classic





























































































































































































































































































































































Reviews:

No comments