Chevrolet 2004 Classic Owner'S Manual Download Page 248

Page: 248 / 348

1. Open the hood.

2. Carefully pull directly up on the two latches to

unhook the lamp assembly.

3. Remove the lamp assembly from the vehicle by

pulling it forward. Use care not to scratch the
vehicle with the lamp or the lamp with the fender.

4. Unclip the wiring harness and twist the socket

less than one-quarter turn counterclockwise and
remove it.

5. Gently wiggle the bulb from the socket. Replace the

old bulb with a new bulb.

6. Turn the socket back into place and reconnect the

wiring harness to the socket.

7. Return the lamp assembly to its original position.

Be sure to line up the holes in the lamp assembly
to the round ends of the mounting pins.

8. Press down on the two latches to hook the lamp

assembly in place.

5-46

Summary of Contents for 2004 Classic





























































































































































































































































































































































Search results

Summary of Contents for 2004 Classic

Reviews:

Chevrolet 2004 Classic, Owner'S Manual, Page: 248 / 348

Search results

Summary of Contents for 2004 Classic

Reviews: