Chevrolet 2004 Classic Owner'S Manual Download Page 68 | Manualshive

Page: 68 / 348

Chevrolet 2004 Classic Owner'S Manual Download Page 68

Servicing Your Air Bag-Equipped
Vehicle

Air bags affect how your vehicle should be serviced.
There are air bag system parts in several places around
your vehicle. You don’t want the system to inflate
while someone is working on your vehicle. Your dealer
and the service manual have information about
servicing your vehicle and the air bag system. To
purchase a service manual, see Service Publications
Ordering Information on page 7-11.

{

CAUTION:

For up to 10 minutes after the ignition key is
turned off and the battery is disconnected, an
air bag can still inflate during improper
service. You can be injured if you are close to
an air bag when it inflates. Avoid yellow
connectors. They are probably part of the air
bag system. Be sure to follow proper service
procedures, and make sure the person
performing work for you is qualified to do so.

Air bag systems do not need regular maintenance.

Restraint System Check

Checking Your Restraint Systems

Now and then, make sure the safety belt reminder light
and all your belts, buckles, latch plates, retractors
and anchorages are working properly. Look for any other
loose or damaged safety belt system parts. If you see
anything that might keep a safety belt system from doing
its job, have it repaired.

Torn or frayed safety belts may not protect you in a
crash. They can rip apart under impact forces. If a belt
is torn or frayed, get a new one right away.

Also look for any opened or broken air bag covers, and
have them repaired or replaced. The air bag system
does not need regular maintenance.

1-62

«
...
66
67
68
69
70
...
»

Summary of Contents for 2004 Classic





























































































































































































































































































































































Reviews:

No comments