Home
/
Chevrolet
/
2004 Classic
/
Owner'S Manual

Chevrolet 2004 Classic, Owner'S Manual, Page: 149 / 348

Share

Page: 149 / 348

Chevrolet 2004 Classic Owner'S Manual Download Page 149

BAND (Alternate Frequency): Alternate frequency
allows the radio to switch to a stronger station with the
same program type. To turn alternate frequency on
press and hold BAND for two seconds. AF ON
will appear on the display. The radio may switch to
stronger stations.

To turn alternate frequency off press and hold BAND
again for two seconds. AF OFF will appear on the
display. The radio will not switch to other stations.

RDS Messages

ALERT!: Alert warns of local or national emergencies.
When an alert announcement comes on the current
radio station, ALERT! will appear on the display. You will
hear the announcement, even if the volume is muted
or a cassette tape or CD is playing. If the cassette tape
or CD player is playing, play will stop during the
announcement. You will not be able to turn off alert
announcements.

ALERT! will not be affected by tests of the emergency
broadcast system. This feature is not supported by
all RDS stations.

INFO (Information): If the current station has a
message, the information symbol will appear on the
display. Press this button to see the message. The
message may display the artist, song title, call in phone
numbers, etc.

If the whole message is not displayed, parts of the
message will appear every three seconds. To scroll
through the message at your own speed, press
the INFO button repeatedly. A new group of words will
appear on the display with each press. Once the
complete message has been displayed, the information
symbol will disappear from the display until another
new message is received. The old message can
be displayed by pressing the INFO button. You can
view an old message until a new message is received
or a different station is tuned to.

When a message is not available from a station, NO
INFO will be displayed.

3-47

«
...
147
148
149
150
151
...
»

Summary of Contents for 2004 Classic





























































































































































































































































































































































Reviews:

No comments