manualshive.com logo in svg

Chevrolet 2001 Express Van, Owner'S Manual

Share
Download
Chevrolet 2001 Express Van Owner'S Manual Download Page 295

6-26

Radiator Pressure Cap

The radiator pressure
cap is located near 
the center of the
engine compartment.

NOTICE:

Your radiator cap is a pressure

-

type cap and

must be tightly installed to prevent coolant loss
and possible engine damage from overheating. 
Be sure the arrows on the cap line up with the
overflow tube on the radiator filler neck.

Power Steering Fluid

The power steering fluid reservoir is located on the
driver’s side of the engine compartment. See “Engine
Compartment Overview” in the Index for more
information on location.

Summary of Contents for 2001 Express Van





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands